![]() To read the online guide, you must have Microsoft Internet Explorer 4.0 (or later) or Netscape Navigator 4.0 (or later) installed on your computer. It includes how to set up the network interface, install the configuration software, and modify network settings of your device and computer.įor information about your device, see the manual shipped with the device. This Reference Guide contains information about using the network interface on a network. The protocols that the network interface can use may vary depending on the operating system and the network configuration. This does not imply that you can use all of the above-mentioned protocols on your network or operating system. The EpsonNet Config utility configures the network interface to work only with protocols that exist on your network. You can use the device on the TCP/IP network at once.įor protocols such as TCP/IP, NetWare, NetBEUI, AppleTalk ®, IPP, and SNMP, you can use EpsonNet Config, the configuration utility provided with your product, to quickly and easily configure the network interface to use these protocols. If you are using an all-in-one, EpsonNet EasyInstall installs the drivers on your computer. Use EpsonNet EasyInstall to easily configure the network interface for use on a TCP/IP network. This network interface is Wi-Fi certified for interoperability with other 802.11-compliant products.īecause the network interface supports multiple protocols and automatically detects protocols on your network, you can print from Microsoft ® Windows ®, Apple ® Macintosh ®, UNIX ®, and IBM ® OS/2 applications. Then the device prints or scans the file when the network interface receives the radio signal directly from a computer or from an access point. With this network interface, you can create a wireless connection between the Epson device and a local area network using the IEEE 802.11b/g communication standard.Ī radio signal is transmitted over the wireless network when you send a job to the device. Print Server is a wireless network interface that connects to the USB port of an Epson device (such as printer or all-in-one). Introduction About Your Network Interface FCC Compliance Statement for United States Users.Wireless Network Interfaces Specification.Problems Specific to Your Network Environment.Setting and checking the new IP address.Setting an IP Address Using the arp/ping Command.Setting up for SCO UNIX 4.2 or later (Open Server).Setting up for IBM AIX 3.2.5 or later and 4.1.3 or later.Setting up for SunSoft Solaris 2.4 or later.Setting Up Different UNIX Systems Using the lpr Command.When there is a primary server in the local network.When there is a primary server at the dial-up destination.Instructions for Using a Dial-Up Network.Setting the printer on client workstations.Configuring for NetWare using EpsonNet Config.Using Remote Printer Mode (NetWare 3.x).Using NDS Print Server (NetWare 4.x/5.x/6.0).Using Bindery Print Server (NetWare 3.x/4.x).Accessing the User’s Guide for EpsonNet SetupManager.EpsonNet WebManager Operating Structure.Adding a port for a printer assigned with a static IP address.Adding a port for a printer assigned with a dynamic IP address.About Installing Components on Your Computer.The IEEE 802.11g Communication Standard.Instructions on Using the Network Interface.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |